77 evinrude motor 70 horsepower 50.1 ratio

[musiman812003]

what is the ratio for DFI synthetic blend outboard oil tc-w3

 

[Daviet]

Re: 77 evinrude motor 70 horsepower 50.1 ratio

Welcome to the forum.
50:1 is correct.

 

[musiman812003]

Re: 77 evinrude motor 70 horsepower 50.1 ratio

Welcome tothe forum.
50:1 is correct.

I Have A Gallon Of West Marine Oil DFI Synthetic Blend TC-W3 2-Cycle It Say's For Evinrude Motors, I Need To Know The
Ratio Mix, Is It 50.1 Or What?

 

[Daviet]

Re: 77 evinrude motor 70 horsepower 50.1 ratio

As I said in my last post, 50:1 is correct.

 

[bonz_d]

Re: 77 evinrude motor 70 horsepower 50.1 ratio

Or 1 pint to 6 gal, 2 pints to 12 gal.

 

[musiman812003]

Re: 77 evinrude motor 70 horsepower 50.1 ratio

Thanks For The Pointers That I Was Given On The Gas/Oil Ratio, I'm On Track Now.

 

[keith1971]

Re: 79 25hp evinrude throttle and forward-nuetral-reverse adjustment??

Re: 79 25hp evinrude throttle and forward-nuetral-reverse adjustment??

As I said in my last post, 50:1 is correct.

have a 79 evinrude 25 hp can anyone help me on how to adjust throttle and forward-reverse .electric start, not a tiller, and also any adjustment on the carb,finally got it to start and idle smoothly,i rebuilt the carb ,new waterpump,plugs, looks like carb gaskets are wet,also, when I put it in reverse the cable moves the lever on the motor,but not enuff to engage it have to use hand and push it in and it will engage vise versa in forward any help is greatly appreciated

 

[Bosunsmate]

Re: 79 25hp evinrude throttle and forward-nuetral-reverse adjustment??

Re: 79 25hp evinrude throttle and forward-nuetral-reverse adjustment??

have a 79 evinrude 25 hp can anyone help me on how to adjust throttle and forward-reverse .electric start, not a tiller, and also any adjustment on the carb,finally got it to start and idle smoothly,i rebuilt the carb ,new waterpump,plugs, looks like carb gaskets are wet,also, when I put it in reverse the cable moves the lever on the motor,but not enuff to engage it have to use hand and push it in and it will engage vise versa in forward any help is greatly appreciated

Start a new post mate, post your model number too