1995 evinrude 60 flywheel torque

[phillnjack2]

Evinrude 1995 60hp triple
Model no BE60TLEOC

I am trying to find the flywheel nut torque spec so when re-assembly of the flywheel takes
place i am ready to tighten
it down.
Also does this need to be re-torqued after a certain amount of running time or just left alone.



phill

 

[phillnjack2]

Re: 1995 evinrude 60 flywheel torque

Ive been told its around 100 ft lbs
does this sound about right ?

when i took the nut off it was very very tight, if anything i would of said even more than a 100.


phill

 

[WernerF]

Re: 1995 evinrude 60 flywheel torque

1989 60...70hp factory manual says 100...105 ft lbs (135...140Nm)
The manual also says to coat the threads of the flywheel nut with OMC gasket sealing compund.
No re-torque mentioned anywhere.