EVINRUDE 9.5hp 1973 shifting problem

narrowfarm

Seaman Apprentice
Joined
May 28, 2011
Messages
45
Hello my Evinrude 9.5hp will not shift into forward.Neutral and reverse work fine. I tried the adjustment for the shift lever next to the flywheel.I believe the problem is in the lower unit.Before i tear into it,any ideas what to look for?? thanks john
 

mini-x fan

Seaman
Joined
Jun 16, 2012
Messages
65
Re: EVINRUDE 9.5hp 1973 shifting problem

Is the motor running when you are shifting? If not, then spin the prop with your foot or something while trying to shift. (unplug the plug wires just in case) Also make sure the throttle is in the shift position. Hope this helped

Tight Lines
 

narrowfarm

Seaman Apprentice
Joined
May 28, 2011
Messages
45
Re: EVINRUDE 9.5hp 1973 shifting problem

I did try it both ways, running and not running.When not running i try to spin thr prop and shift.I just get neutral and reverse. I am going to have o open up where the gears are to see if anything is broken,like a shift craddle.Was just hoping to get an idea from someone who may know. thanks john
 
Top