48 hp evinrude power trim problem

keener1

Recruit
Joined
May 29, 2012
Messages
1
I have a 1995 48 hp evinrude with a power trim issue.The motor runs but will not raise. Can't move it due to the fact the manual overide screw is frozen been spraying PB blaster on it but no luck. any suggestions?
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: 48 hp evinrude power trim problem

You might want to try an impact screw driver, but use it gently, and some heat from a propane torch.
 
Top