Correct water pump for 1996 115HP Evinrude Intruder

[DWilks]

I'm trying to order the right water pump for my motor but find that there are
two different ones. Model: E115GLEDR and don't know how to tell if it's a 60
or 90 degree(whatever that means) ...also some list as SL, DL??. Can someone
tell me how to find out what I need to know to get the right water pump....Thanks

 

[Willyclay]

Re: Correct water pump for 1996 115HP Evinrude Intruder

Welcome to the forum. The members here are great and the experts, which I am not, can help you with any problem. The link below should get you to the correct part number for that model. Just make sure you copied the model number correctly because it may make a difference. Good luck!

http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1996&hp=115&model=E115GLEDR

 

[DWilks]

Re: Correct water pump for 1996 115HP Evinrude Intruder

Welcome to the forum. The members here are great and the experts, which I am not, can help you with any problem. The link below should get you to the correct part number for that model. Just make sure you copied the model number correctly because it may make a difference. Good luck!

http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1996&hp=115&model=E115GLEDR

thanks, Willy...that is the place and figure that I was looking at to get the info....but it list two separate
numbers for the water pump and I must need more info to choose which one

 

[wilde1j]

Re: Correct water pump for 1996 115HP Evinrude Intruder

91 0434421 WATER PUMP REPAIR KIT (Includes impeller hous ng) 1 $66.63 USD

You can find all parts at the BRP Evinrude site and complete parts diagrams as well.

 

[Willyclay]

Re: Correct water pump for 1996 115HP Evinrude Intruder

There ya go! Jim is one of those "experts" I mentioned. Good luck!

 

[AlTn]

Re: Correct water pump for 1996 115HP Evinrude Intruder

looks like 0434421 supersedes to 5001594...$53.73 for the 20" shaft..or, 5001595..$60.32 for the 25" shaft at marineengine.com

 

[DWilks]

Re: Correct water pump for 1996 115HP Evinrude Intruder

looks like 0434421 supersedes to 5001594...$53.73 for the 20" shaft..or, 5001595..$60.32 for the 25" shaft at marineengine.com

AITn, thanks but how did you find out that the 5001595 is for a 25 inch shaft vs a 5001594 for a 20 inch shaft? I know
by the model number(I did buy the manual from iBoats two weeks ago) that I have a 20 inch shaft. Would you answer
that ...please

 

[wilde1j]

Re: Correct water pump for 1996 115HP Evinrude Intruder

The model number nails the shaft length. Just decode it.

 

[DWilks]

Re: Correct water pump for 1996 115HP Evinrude Intruder

The model number nails the shaft length. Just decode it.

wilde1j, I did decode it...that's why I said I have a 20 inch shaft..but would still like to know how to get
the correct number for my particular model. The site, marineengine.com list two different part numbers
for a 115HP. "115HP 1979-Up" list part number 18-3392, and then list "115HP SL,DL 1995 & UP" list part
number as 18-3315-2. That is why I was asking "what does SL, DL mean" so that I could get the right
part number...Thanks

 

[OutOfControl]

Re: Correct water pump for 1996 115HP Evinrude Intruder

DWilks,
Here is a link to the BRP site for diagrams and helpful information, and one for the Model Year Guide.

 

[AlTn]

Re: Correct water pump for 1996 115HP Evinrude Intruder

marineengine.com..your year and model no....gearcase..for the 20" model part 91..for the 25 "model part 97

 

[DWilks]

Re: Correct water pump for 1996 115HP Evinrude Intruder

Thanks AITn, I will go with what every one is saying. If the sites were listing for a 25 inch shaft, I would think they would use the
model number of E115GXEDR(using an X instead of an L) for the 25 inch shaft...at least going by the manual. Thanks all for the info
and I consider this to be the end of this thread