1955 johnson jw-11 prop part # ???

[warrenjets]

So im trying to get this old seahorse running and i noticed that the prop was cracked. I looked around and im having a hard time trying to find the part number for the prop so i can order a new one. Its a two blade prop and a 3 hp johnson jw-11. thanks for everyonees help

 

[kbait]

Re: 1955 johnson jw-11 prop part # ???

203919 is the two-blade #. A 3 blade will work fine, but either way it must be from a weedless lower unit '52-'67 or so.
Call Tim's 218-682-2331, they'll likely have good used. if not:
http://forums.iboats.com/showthread.php?t=438822

Good luck!

 

[kfa4303]

Re: 1955 johnson jw-11 prop part # ???

HI warren. Cool little motor you got there. Here's a link to a parts catalog and exploded diagrams for your speed machine. It should help you look up any relevant part numbers.


http://www.marineengine.com/parts/v...ntage-evinrude-johnson/376399/37639900001.htm

 

[warrenjets]

Re: 1955 johnson jw-11 prop part # ???

Ah crap.. In Haste i ordered one off o ebay.. It was new old stock.. odd thing is its a reverse pitch propeller. I wonder what this thing fits?
here are the numbers on it. 300,560 and m 6 5/8 x 4 1/4. I sould of just called the number above to begin with.. (

 

[lindy46]

Re: 1955 johnson jw-11 prop part # ???

Heh Heh - well, going backwards won't be difficult, and you can turn the motor around 180 degrees to go forward!

 

[kfa4303]

Re: 1955 johnson jw-11 prop part # ???

I agree. You could just mount it on the bow like an electric trolling motor while you're at it too. That way you can still reach the controls and stuff. It would get you some looks for sure at the lake. That prop must be for a motor in the Southern Hemisphere, where everything spins backwards

 

[warrenjets]

Re: 1955 johnson jw-11 prop part # ???

does the two or three blade make a difference. Its going on the back of my canoe. I would like to keep it original if possible...

 

[kbait]

Re: 1955 johnson jw-11 prop part # ???

I've used both as kicker motors. I couldn't tell any difference 2 vs. 3 blade.

 

[kfa4303]

Re: 1955 johnson jw-11 prop part # ???

Ditto. I don't think it would make much of a difference one way, or the other, on a motor that small. My little 3 hp has a 3 balde prop, but I've seen much more powerful mud motors and the like with 2 blade props. I think the overall size, direction of spin and pitch are more important than the number of blades.

 

[warrenjets]

Re: 1955 johnson jw-11 prop part # ???

I wanted to say thanks. I got it running. New points. coils condenser and carb kit. Still havnt got a prop.. back to the parts diagram i go.