I need help with hose routing for 1984 35 evinrude

[bumpus_r]

I have a 1984 evinrude 35 horse.

Here is what I have.

Fuel pump is a 2 nipple,

comes out of fuel pump into a L nipple reduced to a 3/16 th line.

I have a nipple behind the fuel pump on the block top left.

I have 2 nipples on the front of the block one below the flywheel, one below the carb

One nipple on the intake

3 nipples on the carb, one in the front, one on the back one real small nipple on top

I have the primer, 2 nipples, one about 5/32 and one real small nipple o the side

I have searched every web site, have the clymer evinrude manual, thats worthless.

Does anyone have a diagram or know where I can get one?

Can anyone help he.

 

[jasper60103]

Re: I need help with hose routing for 1984 35 evinrude

I have a 1984 evinrude 35 horse.

Here is what I have.

Fuel pump is a 2 nipple,

comes out of fuel pump into a L nipple reduced to a 3/16 th line.

I have a nipple behind the fuel pump on the block top left.

I have 2 nipples on the front of the block one below the flywheel, one below the carb

One nipple on the intake

3 nipples on the carb, one in the front, one on the back one real small nipple on top

I have the primer, 2 nipples, one about 5/32 and one real small nipple o the side

...

I just so happen to have my carb off at the moment and took a few pics. Hope this helps.

(1) Carb front nipple connects to the primer (5/32" line)
(2) Carb back nipple connects to the fuel pump (3/16" line)
(3) Carb real small nipple on the top connects to the primer (small line)