Removing prop drive from 96' Evinrude 6hp?

looseheadsurfer

Recruit
Joined
Nov 4, 2009
Messages
5
I have a 96' Evinrude 6hp 2stroke. the shift lever stuck in forward and I have figured out that the problem was down in the foot. the lever that the gear shaft turns will not budge. I have removed the prop and drive but I cannot get the gear out of the assembly. The vertical gear that the drive shaft turns is holding the forward gear in place.

Any ideas?
 

Haffiman

Commander
Joined
Dec 17, 2009
Messages
2,454
Re: Removing prop drive from 96' Evinrude 6hp?

You have to take down the gear case, remove the water pump, pull up the shaft.
 
Top