1995 Evinrude 200 HP OceanPro Hose Question

winsor94

Cadet
Joined
Jul 15, 2004
Messages
8
Can anyone tell me where the small (maybe suction?) hose connects to at the base of the block right behind the carbs? For some reason I noticed it was connected to the block end, but the other end was not connected to anything. It's about 8" long. At first it looked like it connected to the plastic housing in front of the carbs to catch leftover fuel but that was already connected by another hose. Any advice or diagrams would be appreciated. Thank you in advance!
 

oldcatamount

Lieutenant Commander
Joined
Apr 4, 2010
Messages
1,740
Re: 1995 Evinrude 200 HP OceanPro Hose Question

There is a small hose that connects to the air silencer and runs back to the crankcase (air silencer drain), but, I only see one. Go to www.shop.evinrude.com and look up the diagrahms for your motor. You can enlarge them to. Hope that helps.
 

bob johnson

Rear Admiral
Joined
Feb 25, 2009
Messages
4,304
Re: 1995 Evinrude 200 HP OceanPro Hose Question

I have an ocean runner 115 and it has two hoses that run to the airbox!!!!!!!!!!!!! one up high on the starboards side and one down low on the port side.

OR VISE VERSA!! ha ah ah


hope that helps
 
Top