Low Voltage to trim tilt motor 1985 Johnson v4

[gulfcoastsurf]

model number J90TLC0S just got the boat motor and the trim and tilt motor was frozen took of the trim and tilt motor and swapped it with a working one reinstalled it work great with it hook up direct to the battery but when i hook it up to the wires on the motor i get a low power enough to make noise but not enough to move the boat motor up or down gonna get the actual volt tomorrow to see how low it is thank

 

[jonesg]

Re: Low Voltage to trim tilt motor 1985 Johnson v4

Good idea to use a meter, put it on the relays , they are consumable parts but can be popped open and resoldered if you like. Could also just be switch or a wire corroded internally, the meter will tell.

 

[Faztbullet]

Re: Low Voltage to trim tilt motor 1985 Johnson v4

Was the motor you installed a 2 or 3 wire motor?