EVINRUDE FICHT 250 HP / 2003 - "NO OIL" ALARM - Please Help

[hydrasports03]

I own a 28 ft with twin 250 evinrudes and my starboard motor lit no oil so I looked at it and could not find out why there was no oil getting to the motor. I decided to pull open a small panel on the left side of the motor to find a slot marked spare fuse empty then pulled the top fuse to find it blown! How can I find out if the injector is the original and what could be blowing the fuse? I put in a new fuse and it popped as soon as i brought up the RPM's. I checked the oil pump and it is giving adequite flow of oil. Please help.

 

[jonesg]

Re: EVINRUDE FICHT 250 HP / 2003 - "NO OIL" ALARM - Please Help

Might want to have the codes read, or get the software and cable from ebay and diy.
Maybe the injector needs rebuilding.

 

[boobie]

Re: EVINRUDE FICHT 250 HP / 2003 - "NO OIL" ALARM - Please Help

When you say good oil flow, are you talking about the oil lift pump ? If you pulled the upper left hand fuse in the PDP and that blew again that fuse goes to the oil injector. The injector also has a pressure switch on it to indicate no oil. You may have a bad oil injector. Take it where you can get a computer read out on it and see what kind of codes come up.