Need High Speed Nozzle

[dkm630]

Looking for (High Speed Nozzle) , not Orifice , for a Johnson 1999 J115PLEEM , (carborator , number on carb = 436798.) would need 4 of them.

Do they still make them , can they be bought , or you have to find second hand ones , cause I have found none on internet, thanks.

 

[nymack66]

Re: Need High Speed Nozzle

Check this site, its listed http://www.boats.net

 

[Dhadley]

Re: Need High Speed Nozzle

Are you looking for the emulsion tube that runs up thru the center of the carb body into the throat?

 

[boobie]

Re: Need High Speed Nozzle

First off why are you looking for high speed nozzles ? They are part of upper carb body and not sold seperately.

 

[tashasdaddy]

Re: Need High Speed Nozzle

http://shop2.evinrude.com/Index.aspx?s1=4087pscv1dpd45surbakes2224&catalog_id=0&siteid=1

 

[Dhadley]

Re: Need High Speed Nozzle

Depends on what a high speed nozzel is. If we're talking about the emulsion tube, some have been available in the past even though there was no part number. Let's define what we need.