cliff notes:
I would like a fuel pump with an
1. inlet gas tube.
2. outlet gas tube
3. pressure port tube to run the pump
4. that will run a 40 hp motor
Details:
I have a 1985 Evinrude 40 hp motor E40ELCO. The VRO fuel pump quit working and a new VRO costs more than the motor is worth. I dont mind mixing gas so I would like to just get a gas only fuel pump. The problem is that the part reference that everyone gives me for a fuel only pump is
http://www.iboats.com/Fuel-Pump-for-Johnson-Evinrude-382354-385781-388268-394543-395713-398338-398387-432451-433387-438556-Sierra/dm/view_id.174141
But this one doesn't work for my motor becuase my motor doesn't have the bolt holes and pressure port on the side of the block. I would like a fuel pump that I could hook up to the pressure pulse tube coming out of my motor that went to the old VRO.
I would like a fuel pump with an
1. inlet gas tube.
2. outlet gas tube
3. pressure port tube to run the pump
4. that will run a 40 hp motor
Details:
I have a 1985 Evinrude 40 hp motor E40ELCO. The VRO fuel pump quit working and a new VRO costs more than the motor is worth. I dont mind mixing gas so I would like to just get a gas only fuel pump. The problem is that the part reference that everyone gives me for a fuel only pump is
http://www.iboats.com/Fuel-Pump-for-Johnson-Evinrude-382354-385781-388268-394543-395713-398338-398387-432451-433387-438556-Sierra/dm/view_id.174141
But this one doesn't work for my motor becuase my motor doesn't have the bolt holes and pressure port on the side of the block. I would like a fuel pump that I could hook up to the pressure pulse tube coming out of my motor that went to the old VRO.
