fireman57
Captain
- Joined
- Aug 24, 2004
- Messages
- 3,811
Have a '93 25hp tiller handle. starts and idles fine. won't take off for high speeds unless I hold my fingers and partially block the throat to restrict the air. fuel flows freely into it but when the butterfly is fully open it bogs and will die. I have had this carb apart twice already and rebuilt it the first time and checked/cleaned the second. Still does it. What have I missed? It's not like this is the first one I've done. There is a brass screw at the top which controls the air and it runs best about 1.5 turns out but won't let it kick into high speed without my two fat fingers blocking some of the air.