89rudeness
Recruit
- Joined
- Apr 6, 2010
- Messages
- 3
got a problem
started with an overheating problem, had to R&R heads to replace rubber insertes around cylinder heads, after repair now it falls off around 4000 rpm unless you pull back on throttle, sounds like fuel issue, but has new fuel pump, lines, bulb, carbs rebuilt, check compression, 100psi each cylinder.
have any ideas, thanks
started with an overheating problem, had to R&R heads to replace rubber insertes around cylinder heads, after repair now it falls off around 4000 rpm unless you pull back on throttle, sounds like fuel issue, but has new fuel pump, lines, bulb, carbs rebuilt, check compression, 100psi each cylinder.
have any ideas, thanks