carb adjustment 1994 evinrude 120

chuck d

Recruit
Joined
Nov 3, 2008
Messages
2
i need to know what the adjustment on the carbs for a 1994 evinrude 120. the model # e120tlerc. once i screw them in how many times do i need to turn them out. THANK YOU VERY MUCH. i had to clean the carbs. when i did i messed with the idle adjustment. THANKS AGAIN.
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: carb adjustment 1994 evinrude 120

the fixed jets screw all the way in until snug. you do not back the out. the idle air mixture all the way in, then out 1 1/2 turns, then adjust from there only one carb at a time, 1/8 turn at a time.
 

chuck d

Recruit
Joined
Nov 3, 2008
Messages
2
Re: carb adjustment 1994 evinrude 120

thank you very much for info. i will try that in morning when i can see. thank you.
 

ezeke

Supreme Mariner
Joined
Sep 19, 2003
Messages
12,532
Re: carb adjustment 1994 evinrude 120

Because the 1994 looper carbs have both idle air bleed orifices and idle speed needles, it is important to follow the service manual instructions as opposed to generic adjustment.

The initial setting is to turn the needles in until they gently seat, then out 2-1/2 turns counter clockwise and leave them.
 
Top