SgtSabotage
Cadet
- Joined
- Dec 3, 2016
- Messages
- 7
So this is probably a stupid question but here goes. I got this motor last year and the last time I started the motor it was attached to the boat in a bucket. Now the motor is on a stand in the garage and I want to start it to tune and check the work that I have done to it. I was just going to jump the starter but I am not sure about the 4 smaller wires in the connector for the motor. Do I need to jump them or tie any of them to ground? I have the main power that goes to the starter(solenoid is also removed and out of the equation). The main ground cable. Then I have a plug with 4 wires, 2 black wires on the outside and a white wire(or yellow...lke it was white once) and a brown wire. The 2 black wires are for the magneto I believe. Any help would be appreciated.
Thanks,
Chris
Thanks,
Chris