ns90a

Moondance

Recruit
Joined
Jul 4, 2017
Messages
4
Needing to replace water pump on the NS90A, have all 6 bolts out and the gear linkage off. But the LU will not lower at all, is there something I'm missing? Annoyed
 

pvanv

Admiral
Joined
Apr 20, 2008
Messages
6,509
Water pump repair kit. Includes all parts needed to replace water pump.
Fits: 90A 2-stroke model. Part #: 3B7652311M MSRP: $99.37

The drive shaft is stuck in the crank. You need wedges and patience. Much patience. Do not hammer on the LU; it is easily cracked.
 

Moondance

Recruit
Joined
Jul 4, 2017
Messages
4
Thank you, running out of patience after finding the secret 7 bolt. It also is stripped and rusted. Staying positive and patience. tks.again
 

Moondance

Recruit
Joined
Jul 4, 2017
Messages
4
Water pump repair kit. Includes all parts needed to replace water pump.
Fits: 90A 2-stroke model. Part #: 3B7652311M MSRP: $99.37

The drive shaft is stuck in the crank. You need wedges and patience. Much patience. Do not hammer on the LU; it is easily cracked.
Hello Paul, thanks for the good advice, wedges and patience did it. But now I can't get the old housing out. Try prying,soaking in Blast,vise-grips, and cutting. Afraid of cracking the mount. Am I missing something? Thanks
 

pvanv

Admiral
Joined
Apr 20, 2008
Messages
6,509
Do you mean that the water pump case is stuck in the LU casting?
 
Top