1995 Force 120hp. Lower unit gaskets?

Dave K.

Chief Petty Officer
Joined
Sep 21, 2007
Messages
437
I'm trying to purchase 3 new gaskets from "IBoats" for the lower unit for when I change out the gear oil. 1995, 120hp. Can someone help with a part number?

I need the serial number which I can't get until I get home and look at the motor, but, the gaskets I'm assuming will be universal for any '95, 120hp lower unit. I could be wrong though, it's happened before.

Ty, Dave
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
17,923
The only gaskets are the ones on the water pump assy.
The rest of the seals or O-rings
That what you need?
43033 1 43047 2 817277 Here's the numbers.
The last is the gasket under the pump housing that's included in the pump kit.
 

Dave K.

Chief Petty Officer
Joined
Sep 21, 2007
Messages
437
Thx Jerry! I want to replace the gaskets (or washers I guess) on the vent, fill and drain screws after I change out the gear oil.
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
17,923
I didn't even think about the "gaskets" that seal the drain plugs.
I use Mercury washers on most of my jobs.
The Yamaha ones are a bit smaller.
I buy them a dozen at a time.
Omc uses plastic one time washers. "junk"
 
Top