If i have screwed up as bad as i think i have

[Fatbs]

As i was re-tapping the holes on the flywheel i screwed up and drill all the way through the flywheel and if i have screwed up as bad as i think i have be watching eBay, Craigslist, where ever else i can part out this 1984 force 125

 

[pnwboat]

As long as you didn't damage the circular trigger magnet that is around the hole in the flywheel on the under side, you should be OK.

 

[Jiggz]

Worst thing is probably replace the flywheel which is really not that bad.

 

[Oregonbayliner]

It will be way off balance if you don't find a way to balance it out

 

[jerryjerry05]

Just drilling a couple of holes in the flywheel won't affect the balance that much.
The holes are close to he center and won't affect it.
You'd have to do a bunch of damage to the edge to affect it.
The holes shouldn't line up with anything so you probably didn't hurt anything.

 

[Fatbs]

Thank for the hope. But so far with this motor if there is a remote chance i can screw something i can and have done it.I will keep you updated.