engine help and 1996 engine picture

rzkas

Petty Officer 2nd Class
Joined
Aug 5, 2010
Messages
178
HI? i am working on a project and i am running into trouble. i need pictures. If you have a 1996 force 120hp pls take pictures of the side where the coils are mounted and the other side where the stater and other electrical are. i am swaping from 1995 engine to 1996 engine with 1996 electrical parts. they look different.

secondly the flywheel for a 95 doesn't seem to drop in on the 96 engine.

anyone has a 1996 engine flywheel for sale.

thank you.
 

pnwboat

Rear Admiral
Joined
Oct 8, 2007
Messages
4,251
The 1995 ignition system is different from the 1996 ignition system. The center hole in the 1995 flywheel is smaller that the center hole in a 1996 flywheel. This is because the crank shaft snout is larger in diameter on the 1996 motor. The 1996 flywheel is available on the auction sites. Not sure if they will ship to where you are located though.
 

rzkas

Petty Officer 2nd Class
Joined
Aug 5, 2010
Messages
178
thank you for your fast response. pls help me out with pics of a 96 force engine both sides so i can use the pictures to put together engine. pls keep an eye out for me for the flywheel but will the stator and trigger from a 1995 work on a 1996 with a 1996 flywheel. stator and trigger mount and sit just fine.
 

pnwboat

Rear Admiral
Joined
Oct 8, 2007
Messages
4,251
The trigger from a 1995 is dimensionally the same as the 1996, however, the 1995 trigger is a winding or coil, where as the trigger for the 1996 ignition is a solid state Hall Effect sensor. I don't know if the 1995 trigger will work with the 1996 CDM ignition.
 
Top