1996 force 75 hp wont start

Alvin perry

Cadet
Joined
Sep 22, 2013
Messages
7
need help have a 1996 75 hp Force ran fine and next time carried it to lake would not start. Have replaced trigger,spark plugs was told the stator was good bought a new flywheel and still will not crank can someone please help and guide me in the right direction Thanks Alvin
 

pnwboat

Rear Admiral
Joined
Oct 8, 2007
Messages
4,251
First thing to check if you haven't already done so is to perform a compression test. Next verify that you have good spark and fuel in the carburetors. Depending on what your findings are will determine the next step. If you have no spark, make sure the Kill Switch is not engaged thus disabling the ignition system.
 

crotonpond

Seaman
Joined
May 15, 2014
Messages
56
Crank it over, pull plugs and see if they are wet, if dry your not getting fuel.
 

Alvin perry

Cadet
Joined
Sep 22, 2013
Messages
7
Thanks guys sorry took so long had a firing problem changed coil and ran great. Really thank you for the help
 
Top