main nozzle issues

[Joe Dirte]

I pulled the top carb to kit it and am having trouble removing the main nozzle, shouldnt a screwdriver do trick with minimal force?

 

[Frank Acampora]

Re: main nozzle issues

The high speed jet is in relatively tight and will "snap" or "creak" when it breaks free. You do need to give it a good grunt sometimes.
Use a 4 way screwdriver with the big flat blade tip. It fits the slot in the jet closely and prevents buggering it.

 

[MickLovin]

Re: main nozzle issues

If some PERSON before me has buggered the pipe coming down through the main nozzle (as in bent the end over) will i have fixed it if I have re-opened it with a same size drill bit? I didn't drill it, I placed it up it and opened the hole.

 

[jerryjerry05]

Re: main nozzle issues

Don't take em out.
No need to remove unless your gonna re-jet