Adding a trim gauge and sending unit on a Force outboard

Joined
Apr 12, 2012
Messages
12
Recently purchased a pontoon boat with a Force 90 (Mercury Marine) does anybody know of a aftermarket trim sending unit & gauge that would work with this motor. Any help would be greatly appreciated.
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
17,924
Need more info??
Year? Model?
The newer 93-99 is Mercury and parts shouldn't be hard to find.
The older is Force and those parts are a lot harder to find.
 
Joined
Apr 12, 2012
Messages
12
No Title

OK, the problem I have is that the ID tag on the motor is badly worn. So to know the Year, Model or Serial # is questionable. It is a Force Motor.
 

Attachments

  • photo277867.JPG
    photo277867.JPG
    92.4 KB · Views: 0
  • photo277870.JPG
    photo277870.JPG
    108 KB · Views: 0
  • photo277872.JPG
    photo277872.JPG
    97.3 KB · Views: 0
  • photo277873.JPG
    photo277873.JPG
    72.5 KB · Views: 0
  • photo277874.JPG
    photo277874.JPG
    63.2 KB · Views: 0
  • photo277875.JPG
    photo277875.JPG
    101.2 KB · Views: 0

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,657
ignition is cdm modules, which were used from 1996 through 1999, so all parts were from the Mercury/Force era.
 

jerryjerry05

Supreme Mariner
Joined
May 7, 2008
Messages
17,924
Mercury bought Force in the early 90's By 95 they were using Mercury's parts.
Before then they used some Mercury and some Force.
​Like Roscoe said that's a Force with Mercury parts.
​Contact Mercury Service for the parts???
​Post on here what you find.
​Good luck.
 
Top