jerryjerry05
Supreme Mariner
- Joined
- May 7, 2008
- Messages
- 17,927
Working on a 25hp
The driveshaft is locked in the splines on the end of the crank.
Any way to remove?
I've hooked vice grips on the shaft and tried to hammer it down.
Doesn't move at all.
Usually I can get it to come out, NOT!!!
Suggestions?
The driveshaft is locked in the splines on the end of the crank.
Any way to remove?
I've hooked vice grips on the shaft and tried to hammer it down.
Doesn't move at all.
Usually I can get it to come out, NOT!!!
Suggestions?