kONA1974
Cadet
- Joined
- Sep 26, 2013
- Messages
- 6
703 Yamaha control side mount. 1990 Yamaha 150 2 stroke. After rebuilding the 3 carbs the motor cranks right up but the throttle won't come down unless I push the cable back at the motor end. Cables are fresh and control box looks pretty good inside and seems to be working properly. There is an arm that engages the cam for the throttle on the carbs. Is this arm suppose to spring back because when I push it back the rpms back down to normal idle? Thanks in advance!
http://s6.postimg.org/hv9xg05wh/20150420_192706.jpg
http://s6.postimg.org/6y8lr8j4x/20150420_192728.jpg
http://s6.postimg.org/xqyrjawgx/20150420_192737.jpg
http://s6.postimg.org/xlv09mp5t/20150420_192810.jpg
http://s6.postimg.org/7ettdo6w1/20150420_192820.jpg
http://s6.postimg.org/616rw3x0h/20150420_192843.jpg
http://s6.postimg.org/hv9xg05wh/20150420_192706.jpg
http://s6.postimg.org/6y8lr8j4x/20150420_192728.jpg
http://s6.postimg.org/xqyrjawgx/20150420_192737.jpg
http://s6.postimg.org/xlv09mp5t/20150420_192810.jpg
http://s6.postimg.org/7ettdo6w1/20150420_192820.jpg
http://s6.postimg.org/616rw3x0h/20150420_192843.jpg
Last edited: