Tilt Trim sender/gauge

Chemdawg

Petty Officer 2nd Class
Joined
Aug 31, 2013
Messages
112
Hello everyone. I rewired my boat recently, and the only gauge left that didn't give me a reading was the tilt trim gauge. I tested the gauge and it appears to work properly.

I took the cover off the sending unit on the side of the gimbal, and it was toast. So I bought a new one, and installed it. Now I get two readings. All the way up. Or all the way down. It doesn't scroll through the whole range on the gauge.

Any ideas?
 

Chemdawg

Petty Officer 2nd Class
Joined
Aug 31, 2013
Messages
112
Re: Tilt Trim sender/gauge

I checked the new sender with an ohm meter and it doesn't change throughout the whole range......
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
8,776
Re: Tilt Trim sender/gauge

I checked the new sender with an ohm meter and it doesn't change throughout the whole range......
Hi there, what engine year, model, stern drive do you have?

Once we know that info, we'll be able to move your thread to the proper forum to be of better assistance to you if possible, Thanks.:)
 
Top