Re: Installing Humminbird
If the boat is wired properly and the proper lines filters are in place, it doesn’t matter where the power comes from or where you route the cables.
Every cable running from the back to the front of my boat is run inside a 4" diameter rigging tube. This includes 2- #10 gauge power cables, a NMEA 2000 backbone cable, all the instrument panel cables, i.e. volt, tachometer, etc, multiple "switched" power cables a 1kW transducer cable and a standalone digital speed sensor.
I’m running an ACR setup so not only is everything run next to each other, they’re all connected to the same source of power. Not a single power related power on the boat.