Woodonglass
Supreme Mariner
- Joined
- Dec 29, 2009
- Messages
- 25,924
Ok since you've done the best you can from the inside Here's my recommendation. Using either the blue or pink slab foam you can get at Lowe's or Home depot, I'd epoxy a piece to the hull and then use a grinder to shape it as best as possible to conform to the shape needed. then I'd use 3 oz glass and do mutltiple lams to tie it into the hull using epoxy resin. Each lam being 2" larger than the previous one. If you do this you should be able to blend the patch to the hull with a pretty much an un-noticeable seam. I hope this makes sense.