seanymph85
Petty Officer 2nd Class
- Joined
- Nov 5, 2013
- Messages
- 199
I need to order marine paint to protect Gluvit sealer from UV on the inside seams and rivets in the bow area of my aluminum boat. After looking at various brands and materials I am confused to be honest about what I really need to use and any special requirements for applying it. Some paints appear to be one or two parts, some appear to require primer but the primer can't be used on aluminum. I was looking at Interlux Brightside but am concerned with the different options in the Brightside line what is necessary for my application.
I know you get what you pay for but given the many options out there and considering my lack of expertise in this area, I am concerned about purchasing more than what I actually need.
Any suggestions on a relatively easy to apply marine paint and if a primer is required with it would be appreciated. Attached is a picture of inside the bow area where the Gluvit sealer will be used. Any areas Gluvit is being applied is thoroughly cleaned now in spite of what the pictures may appear to illustrate.
I know you get what you pay for but given the many options out there and considering my lack of expertise in this area, I am concerned about purchasing more than what I actually need.
Any suggestions on a relatively easy to apply marine paint and if a primer is required with it would be appreciated. Attached is a picture of inside the bow area where the Gluvit sealer will be used. Any areas Gluvit is being applied is thoroughly cleaned now in spite of what the pictures may appear to illustrate.
Attachments
Last edited: