Hi everyone.
About a week ago out on the Hudson River I struck a 2x4 in the river floating just on the surface, it was about 3ft long.
The boat is a 2000 Cobalt 206
I got the boat back on the trailer and sure enough there was some damage on one of the edges of a Starboard chine.
The damage is about 1 1/2 -2 inches long, about 1/2inch wide, maybe 1/8-1/6 of an inch deep
The damage got through the gelcoat, and it looks like some of the resin behind it. It doesn't look like fiberglass (But I'm unsure). I poked around with a screw drivers and definitely no full penetration.
Ive done gelcoat repair before and Bondo work
Im just trying to collect some various opinions, I know its through pictures but any thoughts would be great
About a week ago out on the Hudson River I struck a 2x4 in the river floating just on the surface, it was about 3ft long.
The boat is a 2000 Cobalt 206
I got the boat back on the trailer and sure enough there was some damage on one of the edges of a Starboard chine.
The damage is about 1 1/2 -2 inches long, about 1/2inch wide, maybe 1/8-1/6 of an inch deep
The damage got through the gelcoat, and it looks like some of the resin behind it. It doesn't look like fiberglass (But I'm unsure). I poked around with a screw drivers and definitely no full penetration.
Ive done gelcoat repair before and Bondo work
Im just trying to collect some various opinions, I know its through pictures but any thoughts would be great