nickburns31
Recruit
- Joined
- Apr 23, 2014
- Messages
- 2
:facepalm:Hello all! I am new to the boating community and about 5 years ago I picked up a train wreck of a boat and decided to start fixing all the issues... Long story short.. I fully restored it and I am now trying to figure out how a few things went back in..
One issue is the throttle control box as seen in a photobucket picture . I know its a quicksilver control on an Alpha One Mercruiser. How does the control box goes back into the side panel? I think it was straight up and down with the cables coming out of the bottom? Quicksilver 1000 Commander I do believe?
http://i937.photobucket.com/albums/...0-1A42-471E-B6C9-BFBA51271FE6_zpsnqueznyb.jpg
http://i937.photobucket.com/albums/...6-B3B4-49FF-8D4D-BE3D981D7142_zpsgj5pnuim.png
Also is there a wiring diagram for ignition switches? I built a new modern looking dash with guages and bought a new switch but it has 4 connections, not three as in the old with no labeling of what wire goes where?
New switch
http://i937.photobucket.com/albums/...5-9863-4694-91C3-4317C1C0F1C0_zpsdcpncob4.jpg
Old switch
http://i937.photobucket.com/albums/...0-225A-4FA3-9736-D183569C72D2_zpszu6iudog.jpg
And here is a before and after shot of this train wreck.. If anyone is interested..
http://i937.photobucket.com/albums/...1-44D7-4600-8036-1AD7AAD5EBB2_zpsb8gt7qtl.jpg
http://i937.photobucket.com/albums/...9-2DA5-4482-8A32-7D21972EC5AA_zpspddmgtxt.jpg
I appreciate any help in advance!!!
One issue is the throttle control box as seen in a photobucket picture . I know its a quicksilver control on an Alpha One Mercruiser. How does the control box goes back into the side panel? I think it was straight up and down with the cables coming out of the bottom? Quicksilver 1000 Commander I do believe?
http://i937.photobucket.com/albums/...0-1A42-471E-B6C9-BFBA51271FE6_zpsnqueznyb.jpg
http://i937.photobucket.com/albums/...6-B3B4-49FF-8D4D-BE3D981D7142_zpsgj5pnuim.png
Also is there a wiring diagram for ignition switches? I built a new modern looking dash with guages and bought a new switch but it has 4 connections, not three as in the old with no labeling of what wire goes where?
New switch
http://i937.photobucket.com/albums/...5-9863-4694-91C3-4317C1C0F1C0_zpsdcpncob4.jpg
Old switch
http://i937.photobucket.com/albums/...0-225A-4FA3-9736-D183569C72D2_zpszu6iudog.jpg
And here is a before and after shot of this train wreck.. If anyone is interested..
http://i937.photobucket.com/albums/...1-44D7-4600-8036-1AD7AAD5EBB2_zpsb8gt7qtl.jpg
http://i937.photobucket.com/albums/...9-2DA5-4482-8A32-7D21972EC5AA_zpspddmgtxt.jpg
I appreciate any help in advance!!!