Pettit ez prime and easy poxy 2 part paint

[panamacitymustang]

I'm almost ready to glass In my new deck. Can someone explain to me what is the preping process when using the ez prime and 2 part easypoxy.

 

[Woodonglass]

Re: Pettit ez prime and easy poxy 2 part paint

This should give you all the info you need...
http://www.pettitpaint.com/fileshare/product_pds/Apply-Topside-Finishes.pdf

 

[panamacitymustang]

Re: Pettit ez prime and easy poxy 2 part paint

Thank you very much.

 

[panamacitymustang]

Re: Pettit ez prime and easy poxy 2 part paint

Step 3 says use solvent to clean sanding residue. Is there a certain solvent I should use.

 

[zool]

Re: Pettit ez prime and easy poxy 2 part paint

Step 3 says use solvent to clean sanding residue. Is there a certain solvent I should use.

Pettit 120 is what the system call for, but you can use alcohol or any other flashing solvent.

Heres the tech sheet for the 2 pac ezpox

http://www.pettitpaint.com/fileshare/product_pds/EZPoxy2.pdf

heres the primer

http://www.pettitpaint.com/fileshare/product_pds/EZ-Prime.pdf

 

[panamacitymustang]

Re: Pettit ez prime and easy poxy 2 part paint

Thank you. I just wanted to make sure I was going to get the correct solvent for the job.

 

[Woodonglass]

Re: Pettit ez prime and easy poxy 2 part paint

I used easypoxy on my boat and used a 50/50 mix of Acetone and Mineral Spirits. It worked fine for me.

 

[panamacitymustang]

Re: Pettit ez prime and easy poxy 2 part paint

Thank you I was hoping there was some alternative solvents I could use.