1. No metal prep....didnt even take the paint off!
2. Should have a reinforcement plate on the outside....Or inside if you can get to it.
3. Didnt clean up the end result....dress the weld up
4. Could have repainted the outside.
1. No metal prep....didnt even take the paint off!
2. Should have a reinforcement plate on the outside....Or inside if you can get to it.
3. Didnt clean up the end result....dress the weld up
4. Could have repainted the outside.
1. No metal prep....didnt even take the paint off!
2. Should have a reinforcement plate on the outside....Or inside if you can get to it.
3. Didnt clean up the end result....dress the weld up
4. Could have repainted the outside.
Yes the "goop" needs to be welded on aluminum and a re-build of that chine with aluminum. Properly repaired, ground out to a smooth matching surface, then primed and painted. Do not try to fill and re-build that chine with anything but metal.
If that spot opens up on a wave the way it is nor ....... I am afraid the hull will tear open as easy as tearing a cardboard cereal box.
