Looking for the Idile Ajustment Screw? 1987 85HP FORCE

[fishthebay]

Hello:I did a few posts last week and had a lot of great help from everyone. THANKS....I have determined by checking other things out that the idle speed needs turned up slightly. I am not referring to the carb mixture screw on each carb, but rather the idile speed screw.Now, I do have a manual and looked through it cover to cover. I can't seem to find the screw, although they do reference it in the manual.My best determination is the little roller and stop nut on the bottom carb linkage bar(I HAVE 3 CARBS). My guess is that if I loosed the nut a bit and tighten the screw a bit it will work. Does this sound correct, or is this located somewhere else in the engine like near the side under the flywheel?Thanks everyone.Thanks everyone.

[Jango]

The Idle screw is NOT the little roller and stop nut on the bottom carb linkage bar.The idle screw is located about 2 inches behind the above screw. You will need a 7/16 wrench to loosen the lock nut and then tighten the idle screw clockwise to speed up. ( move your throttle up and down and you will see the Idle Screw come away from the power head)

[fishthebay]

Thank you Janko I appreciate all of your help.