Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 4 of 4
  1. #1
    Seaman
    Join Date
    Nov 2009
    Posts
    50

    Unhappy chrysler force 125 oil coming from exhaust port help

    Bouht Chrysler force 125 it been sitting 5 yrs. Hooked it up to my boat stated right up sounds good. Let it run for 5 min. It. Ran hot. Waiting for Monday to get waterpump kit. Since I just got it I thought I start it justt for a moment. It started right up. Then I noticed oil on the prop cone it was coming from. The exhaust does anyone no the cause for trhis. Thanks guys

  2. #2
    Banned
    Join Date
    May 2011
    Location
    Where The
    Posts
    1,037

    Default Re: chrysler force 125 oil coming from exhaust port help

    Not really enough information to be sure but did you run it the 5 min with muffs on and water flowing..ie splurting out the exhaust ...if you did not you were very foolish. 20 sec with no water will ruin the water pump. So your oil if you did not run with water could just be normal products of combustion running down and out or gunge inside the silencer melting and running out ..what oil ratio did you use 50 :1 is normal

  3. #3
    Seaman
    Join Date
    Nov 2009
    Posts
    50

    Red face Re: chrysler force 125 oil coming from exhaust port help

    fucawi THANKS!! After pulling the lower unit I saw oil and gas mix . It had a sludge look. So I grabbed a little bit of it and rub it in my hand to determine what was making up the grit . It just pretty much dissolved. Pulled the impelled splines were toast plate jacked up. Housing worn and pitted. I could see why she wasn't getting proper water flow. Like fucawi said the oil gas sludge residue was normal .it proably got gummy just sitting all that time. By the way oil and gas mix correct ran water every time started motor. Will give results when I put the water pump kit on.

  4. #4
    Seaman
    Join Date
    Nov 2009
    Posts
    50

    Default Re: chrysler force 125 oil coming from exhaust port help

    Worked great

Similar Threads

  1. 1993 Mariner 9.9 with oil coming out of exhaust port..
    By jon_boat in forum Mercury & Mariner Outboards
    Replies: 5
    Last Post: April 27th, 2010, 12:10 AM
  2. only one exhaust port water coming out
    By kylake254 in forum Johnson & Evinrude Outboards
    Replies: 4
    Last Post: March 23rd, 2010, 07:32 PM
  3. Force 120HP exhaust (fire) coming from fuel pump pulse port
    By iisinc in forum Force & Chrysler Outboards
    Replies: 6
    Last Post: January 1st, 2010, 05:58 PM
  4. water coming out exhaust port
    By billygoat in forum Johnson & Evinrude Outboards
    Replies: 3
    Last Post: August 18th, 2009, 08:06 PM
  5. 1967 60hp johnson a lot of water coming out of top exhaust port
    By zaner in forum Johnson & Evinrude Outboards
    Replies: 1
    Last Post: January 19th, 2006, 11:06 AM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic