Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 4 of 4
  1. #1

    Default 1987 force 50 ignition switch question

    I accidentally arced across two wires.....right above/beside the top coil there is a little square thing(what is it?) that has 4 connectors on it. I accidentally arced ground to the red wire on top. Now the key wont turn the motor over nor will it engage the electric choke. I still have over 12 v running up the red wire thats connected to the B terminal on the rear of the switch. if i jump 12 v to the yellow wire on S terminal the motor will crank....if i turn key nothing happens....Its a bad ignition switch right?

  2. #2
    Commander
    Join Date
    Apr 2008
    Location
    Annapolis, Maryland
    Posts
    2,184

    Default Re: 1987 force 50 ignition switch question

    That little black thing is your rectifier. If you grounded the red wire, you either popped your circuit breaker or blew a fuse. If you have a circuit breaker, it should be on the left side of t he engine behind the starter. If it is the resetable type, there is a button on the top that you push to reset it.

    John

  3. #3

    Default Re: 1987 force 50 ignition switch question

    the breaker flipped and i fixed it. When the breaker is kicked there is no power sent to the ignition switch. After i fixed the breaker i have power all way back to the ignition on the red wire. There is only one hot wire at the ignition switch right?

  4. #4
    Commander
    Join Date
    Apr 2008
    Location
    Annapolis, Maryland
    Posts
    2,184

    Default Re: 1987 force 50 ignition switch question

    That is correct. Your ignition switch is probably faulty.

    John

Similar Threads

  1. 1987 force ignition problems
    By stevensmithnc in forum Force & Chrysler Outboards
    Replies: 1
    Last Post: June 19th, 2009, 01:16 PM
  2. 1987 Force 125 thermostat switch
    By buford123 in forum Force & Chrysler Outboards
    Replies: 0
    Last Post: May 17th, 2009, 07:41 PM
  3. Johnson 88spl 1987 Ignition Switch issue?
    By SPolleyPT in forum Johnson & Evinrude Outboards
    Replies: 1
    Last Post: June 13th, 2008, 06:46 AM
  4. Ignition Wiring, 1987 Force 50
    By cpbrocke in forum Force & Chrysler Outboards
    Replies: 7
    Last Post: June 19th, 2007, 03:30 PM
  5. 1987 Force 125 Ignition Switch Problem
    By jayhawk86 in forum Force & Chrysler Outboards
    Replies: 1
    Last Post: July 31st, 2006, 03:02 AM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic