Please note this thread has been inactive for 90 days. For the best results, please start a new thread.
Results 1 to 7 of 7
  1. #1

    Default Looking for Enclosures for Suntracker Party Cruiser

    I recently purchased a 2000 Suntracker Party Cruiser, and I am looking for enclosures (front and back) for it. Do the enclosures have to be custom made? Any information will be greatly appreciated. Thanks in advance.

  2. #2
    Moderator Bob_VT's Avatar
    Join Date
    May 2001
    Location
    West Rutland, Vermont, United States
    Posts
    24,368

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    Welcome aboard!

    You are in the right place. In the iboats store there are many types of enclosures for the pontoon boats http://www.iboats.com/Boat-Parts-Acc...n_id.294004981 and at good prices.

    You could have custom made canvas and I would recommend a local awning shop and request sunbrella fabric.
    This is a great link to boat specifications http://boatspecs.iboats.com/
    Please, shop iboats first!!


  3. #3

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    Quote Originally Posted by thenana View Post
    I recently purchased a 2000 Suntracker Party Cruiser, and I am looking for enclosures (front and back) for it. Do the enclosures have to be custom made? Any information will be greatly appreciated. Thanks in advance.
    I am in the same boat... no pun intended!... with my 2006 Party Cruiser. The Sun Tracker folks don't have them, which doesn't make sense to me. Luckily I have the old enclosure which will make a custom job a bit easier. But would much rather purchase a "factory made" one for my model.

    You'll be my new best friend if you hook me up with a supplier for the replacement enclosures.
    Thank you.

  4. #4

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    Quote Originally Posted by thenana View Post
    I recently purchased a 2000 Suntracker Party Cruiser, and I am looking for enclosures (front and back) for it. Do the enclosures have to be custom made? Any information will be greatly appreciated. Thanks in advance.
    I am in the same boat (no pun intended!) with my 2006 party cruiser. Suntracker company does not carry them anymore for my model, which doesn't make sense to me. They seem pretty complicated re: custom made route, what with all the velcro clear plastic and screen areas.

    You will be my new best friend if you can hook me up with a supplier for a "factory made" back enclosure.
    Thanks.

  5. #5

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    I know this thread is old, but I just happened upon it and thought I'd post for future reference.

    I recently acquired a 2006 Party Cruiser 32 I/O and was in need of a replacement rear canopy. The tag on the existing canopy was from DOWCO Marine. It turns out that DOWCO makes almost all of the factory canvas for Sun Tracker. For factory standard canvas they make the frames too.

    Alot of these parts are still being made by DOWCO, at least the ones they still have the patterns for. They do not sell to the public though. You have to purchase factory standard replacement parts (Rear Enclosures were standard in 2006) through a Tracker Dealer who in turn orders the part from Tracker who in turn orders the part from DOWCO. If it was a dealer option (like a full front enclosure) it's the same story only you cut Tracker out, any DOWCO dealer can order these straight from DOWCO.

    You can get just the canvas or the canvas and frame. On the rear enclosure you can order the canopy, frame, and sides all separate if you wanted/needed to.
    Last edited by WIMUSKY; March 11th, 2013 at 06:25 PM. Reason: Deleted link....

  6. #6
    Moderator WIMUSKY's Avatar
    Join Date
    Sep 2009
    Location
    NW Wisconsin
    Posts
    6,286

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    You know this thread is old yet you still responded to it even after ignoring the red box. Please read the rules. This is a dead thread.... Thank you....
    How to start an argument online:
    1) Express an opinion
    2) Wait

    2003 1650 Crestliner Fishawk SC
    Johnson 60hp, 4 stroke, electronic fuel inj.
    1979 Crestliner Crusader II 2455
    Volvo/Penta 260hp Chevy, 280 outdrive SOLD



  7. #7
    Banned
    Join Date
    May 2011
    Location
    Lafayette La
    Posts
    5

    Default Re: Looking for Enclosures for Suntracker Party Cruiser

    EDIT: Selling not permitted by Forum Rules, #8.
    Last edited by achris; October 10th, 2013 at 11:57 PM. Reason: Selling not allowed

Similar Threads

  1. 1993 suntracker party barge 21
    By taggy in forum Pontoons
    Replies: 16
    Last Post: April 19th, 2012, 07:15 AM
  2. Adding third log to 25 ft Suntracker Party barge
    By werseabee in forum Pontoons
    Replies: 19
    Last Post: January 16th, 2012, 06:34 PM
  3. Party Hut or Party Cruiser feedback wanted
    By liftinglarge in forum Sun Tracker
    Replies: 0
    Last Post: September 15th, 2011, 08:28 PM
  4. 1995 suntracker 30' party hut prop?? 115hp
    By freddyms in forum Prop Questions and Topics
    Replies: 4
    Last Post: April 10th, 2010, 08:14 AM
  5. SunTracker Party Deck
    By lamard in forum Boat Topics and Questions (not engine topics)
    Replies: 2
    Last Post: February 24th, 2002, 02:09 AM
  1. iboats Forum Directory - Over 100,000 forum posts organized by topic